Galvanized Steel Wire Rope Is Twisted By The Multi-layer Wire

  Galvanized steel wire rope is twisted by the multi-layer wire, and then to the core as the center, by a certain number of twisted into a spiral of rope. In the material handling machinery, for lifting, pulling, tensioning and carrying the use. Galvanized steel wire rope high strength, light weight, smooth work, not easy to break the whole root, reliable work. The following is the galvanized steel wire rope anti-corrosion method:

  1, oiling

  All galvanized steel wire rope must be oiled. Fiber core oil immersion, requiring grease to protect the fiber core does not rot, not corroded steel wire, moisturizing the fiber, and lubricated from the inside galvanized steel wire rope. The surface of the oil so that all the steel wire rope surface are evenly coated with a layer of anti-rust grease, which friction to enhance the mine and the mine with a large rope, to Tujia grinding and strong water resistance of black oil; Coated with strong film, good anti-rust performance of the oil, and the oil layer is thin, easy to keep in the course of operation clean.

  2, coating

  Galvanized, aluminized, coated with nylon or plastic. Galvanized and the steel wire is first plated after the thin coating and the wire after the galvanized thick coating, thick coating mechanical properties than the smooth galvanized steel wire rope has been reduced, should be used in serious corrosive environment. Galvanized galvanized steel wire rope than galvanized galvanized steel wire more corrosion-resistant, wear-resistant, heat-resistant, mainly used for fishery trawls and H2S-containing mines, the first plating after the pull method of production. Coated nylon or plastic galvanized steel wire rope rope and coated with two after the rope.